Specialized in serving large-scale industrial equipment manufacturing enterprises

Provide them with customized coating integration services

8bf36e3e-afc5-40b3-803d-d36e03dc75bc.png
+
  • 8bf36e3e-afc5-40b3-803d-d36e03dc75bc.png

1K Water-borne thermal-set coating for wheel hub


This coating is a single component baking paint, with good weather resistance, strong adhesion, excellent decoration and high gloss of the paint film、widely apply on surface coating of various substrates, providing long-lasting protection.

Categorize: Motorcycle Series


Product Details


Features & Application

This coating is a single component baking paint, with good weather resistance, strong adhesion, excellent decoration and high gloss of the paint film、widely apply on surface coating of various substrates, providing long-lasting protection.
 

Technical Data

Item

Index

Project

Index

Weather Resistance

500h,
No abnormality

Dry Condition

Flash Drying: 80 ℃ x3-5min

Impact Resistance

50kg·cm Hard Drying: 160 ℃ x20-25min

Proportion

1.02 ± 0.1g/cm³ Adhesion/Grade 0

Product matching and Operation parameters

Matching diluent: Distilled water or clean tap water

Operation
Way

Dilution Ratio

Working Viscosity

Remark

Electrostatic Spray

10-20%

T-4  25-30s

The viscosity of the coating will decrease with the increase of ambient temperature, so the specific working viscosity should be slightly adjusted according to the actual environmental conditions.

 


Precautions

The drying effect of water-based coating products is greatly affected by different environmental factors. During using, a comprehensive judgment should be made based on the temperature, humidity, wind speed, and drying conditions of the environment in order to achieve the best appearance and performance of the paint film.

The self-recoating interval must be at least 1 hour after the surface drying time, and the actual time depends on the impact of different environmental humidity and temperature on product drying; Generally between 2 hours and 6 hours; It is best to reapply the topcoat with an interval of more than 24 hours.

The working temperature is between 10 ℃ and 30 ℃, and the working humidity is not more than 80%. It must be thoroughly stirred and evenly mixed before use, and stirring must be maintained to prevent sedimentation during use.  

 

Keyword:

1K Water-borne thermal-set coating for wheel hub

Recommended Products

Enquire Now

If you are interested in our products, please leave your e-mail, we will contact you as soon as possible, thank you!

Submit Message