Specialized in serving large-scale industrial equipment manufacturing enterprises
Provide them with customized coating integration services
Water-borne coating for aluminum profile
Categorize: Series of Special Type Material
Product Details
Brief Introduction
U-T Water-borne coating for aluminum is composed of imported high-quality water-based resin as the main film-forming material, supplemented by environmentally friendly pigments. This coating is a single component baking paint with good adhesion, high hardness, high fullness, and excellent decorative effect. It can be widely applying in the surface of aluminum profiles, providing long-lasting protection.
Component
Special resin for aluminum type material, melamine resin, high-temperature pigment, water and additives.
Application
Specializing decoration for aluminum type material(Water-borne thermal-set coating).
Features
This product is single component packaging, and can be diluted with water, and using water-borne solvents or water cleaning tools. The operation is simple and convenient, and it can meet with environmental protection requirements.
The paint film is high hardness and fullness.
Original paint performance
Main features of paint film
Plate making conditions: Spray coating substrate: Chromium free aluminum plate 50mm×120mm×(0.8-1.0)mm
Thickness of paint film：23±3μm
Dry Conditions:180℃×10-15min
Painting Essentials
This coating can be applied in the painting of aluminum type materials which can be sprayed continuously during processing. It can be divided into two types: primer and topcoat. Please refer to the relevant operation instructions. Spray primer (thickness around 15-20 µ m)=>stillness for 3-5 minutes or baking at 60-80 ℃ × 3-5 minutes before spraying the topcoat (with thickness around 15-20 µ m)==>stillness for 5-10 minutes==>Baking at 180 ℃ ×15-20 minutes, and cool down to offline
Precautions
1.Before using the paint solution must be thoroughly stirred and diluted with water-based solvents or deionized water to the operation viscosity, with a dilution rate around 30-40%,and filter with a 200-300 mesh filter before operation.
2.The relative humidity of the operation environment shall not exceed 80% and good ventilation shall be maintained.
3.During operation, the surface of the coated material should be kept clean, dry, flat, and free of pollutants such as dust and oil.
4.Coatings should be stored in a cool and dry place, with a storage temperature higher than 5 ℃.
5.The storage period of the paint is six months, please be sure to exhaust it within six months.
Keyword：
Water-borne coating for aluminum profile
Recommended Products
Enquire Now
If you are interested in our products, please leave your e-mail, we will contact you as soon as possible, thank you!