Instructions for Water-borne varnish for steel doors
Categorize: Hardware and Bathroom Product Series
Product Details
Brief Introduction
Selecting high-quality water-based resin as the main film-forming material for the water-borne varnish for steel doors, supplemented by environmentally friendly additives and other components. This coating is a single component baking paint with good adhesion, high hardness, high fullness, and excellent decorative effect. It can be widely applied in the surface of steel doors in buildings, providing long-lasting protection.
Component
Architectural steel door coating resin, melamine resin, water and additives.
Application
Special effects and decorative purposes for anti-fire and anti-theft of steel doors in the buildings.
Features
1. This product is single component packaging, and can be diluted with water, and using water-borne solvents or water cleaning tools. The operation is simple and convenient, and it can meet with environmental protection requirements.
2. The paint film is high hardness and fullness.
Original paint performance
Main features of paint film
Plate making conditions:
Spray coating substrate: Steel plates to be sprayed 50mm×120mm×(0.8-3.0)mm
Thickness of paint film:23±3μm
Dry Conditions: 180℃×10-15min
Painting Essentials
It can be applied in the coating of steel doors in buildings, adopting the processing way of spray, drying, or spray continuously. It can be divided into two types: Gloss 20 to 40 and Gloss 60 to 80. Please refer to the relevant painting instructions.
One spray and one drying process: Spray primer (with thickness around 10-15 μm)==> Stillness for 5-10 minutes==>Baking at 180 ℃ for 10-15 minutes=>Cool down to offline=>Spraying topcoat again (thickness about 10-20μm)==>Stillness for 5-10 minutes==>Baking at 180 ℃ for 15-20 minutes then Cool down to offline.
Spraying continuously process: Spray primer (thickness about 10-15μm)==>Stillness for 3-5 minutes or baking at 60-80 ℃ for 3-5 minutes before spraying the topcoat (with thickness around 10-20μm)==>Stillness for 5-10 minutes==>Baking at 180 ℃ for 15-20 minutes then cool down to offline.
Precautions
1. Before use, the paint solution must be thoroughly stirred and diluted with water-based solvents or water to the construction viscosity, with a dilution rate of about 30-40%. Filter with a 200-300 mesh filter before construction.
2. The relative humidity of the operation environment shall not exceed 80% and good ventilation shall be maintained.
3. During operation, the surface of the coated material should be kept clean, dry, flat, and free of pollutants such as dust and oil.
4. Coatings should be stored in a cool and dry place, with a storage temperature higher than 5 ℃.
5. The storage period of the paint is six months, please be sure to exhaust it within six months.
Keyword:
Instructions for Water-borne varnish for steel doors
Recommended Products
Enquire Now
If you are interested in our products, please leave your e-mail, we will contact you as soon as possible, thank you!